manualshive.com logo in svg

Ford RANGER 2016, Owner'S Manual, Page: 102 / 478

Share
Download
Ford RANGER 2016 Owner'S Manual Download Page 102

Type 2

A

E

D

C

F

H

J

G

L

K

I

B

F

E200620

Passenger temperature control:

 Adjust the temperature on the passenger

side.

A

Fan speed control:

 Adjust the volume of air circulated in the vehicle.

B

Driver temperature control:

 Adjust the temperature setting using the control

on the driver side. This control also adjusts the passenger side temperature
when you switch off dual zone mode.

C

MAX A/C:

 Press the button for maximum cooling. Recirculated air flows through

the instrument panel vents, air conditioning automatically turns on and the fan
automatically adjusts to the highest speed.

D

Recirculated air:

 Press the button to switch between outside air and

recirculated air. The air currently in the passenger compartment recirculates.
This can reduce the time needed to cool the interior and reduce unwanted odors
from entering your vehicle.

E

Note:

 Recirculated air may also turn on and off automatically in instrument

panel or instrument panel and floor airflow modes during hot weather to improve
cooling efficiency.

99

Ranger (TKE) Vehicles Built From: 02-05-2016 Vehicles Built Up To: 04-09-2016, EB3B-19G219-AKC enGBR, First Printing

Climate Control

Summary of Contents for RANGER 2016































































































































































































































































































































































































































































































Reviews:

No comments