manualshive.com logo in svg

Ford RANGER 2016, Owner'S Manual

The Ford RANGER 2016 Owner's Manual is a comprehensive guide that provides essential information for owners of this reliable truck. Get instant access to this manual with a hassle-free download from manualshive.com, where you can find the manual for free. Master your Ford RANGER 2016 with this essential manual.

Share
Download
background image

The following table lists possible causes and actions for this message displaying.

Action

Cause

Clean the grille surface in front of the radar
or remove the object causing the obstruc-
tion.

The surface of the radar in the grille is dirty
or obstructed in some way.

Wait a short time. It may take several
minutes for the radar to detect that it is free
from obstruction.

The surface of the radar in the grille is clean
but the message remains in the display.

Do not use the system in these conditions
because it may not detect any vehicles
ahead.

Heavy rain or snow is interfering with the
radar signals.

Do not use the system in these conditions
because it may not detect any vehicles
ahead.

Swirling water, snow or ice on the surface
of the road may interfere with the radar
signals.

It is possible to get a blockage warning and not be blocked. A false blocked condition self
clears or clears after a key cycle.

Switching to Normal Cruise
Control

WARNING

Normal cruise control does not brake
due to slower vehicles. Always be
aware of which mode you have

selected and apply the brakes when
necessary.

You can manually change from adaptive
cruise control to normal cruise control
through the information display.

E71340

The cruise control indicator light
replaces the adaptive cruise
control indicator light if you

select normal cruise control. The gap
setting does not display, the system does
not automatically respond to lead vehicles
and automatic braking does not activate.
The system remembers the last setting
when you start your vehicle.

164

Ranger (TKE) Vehicles Built From: 02-05-2016 Vehicles Built Up To: 04-09-2016, EB3B-19G219-AKC enGBR, First Printing

Cruise Control

Summary of Contents for RANGER 2016































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for RANGER 2016

Jeep Wrangler2018 Owner'S Manual preview
Wrangler2018
Brand: Jeep Pages: 608
Toyota 2016 RAV4 Quick Reference Manual preview
2016 RAV4
Brand: Toyota Pages: 56
Chevrolet 2013 Spark Owner'S Manual preview
2013 Spark
Brand: Chevrolet Pages: 356
Ford Zephyr 2007 Owner'S Manual preview
Zephyr 2007
Brand: Ford Pages: 272
Pontiac 2004 Sunfire Owner'S Manual preview
2004 Sunfire
Brand: Pontiac Pages: 376
Jeep COMPASS 2018 Owner'S Manual preview
COMPASS 2018
Brand: Jeep Pages: 712
PullRite 20K OE Series Installation Instructions Manual preview
20K OE Series
Brand: PullRite Pages: 10
KRAFTWERK Automotive 31006 Instructions preview
Automotive 31006
Brand: KRAFTWERK Pages: 2
XTC ATS-POL-GBU Manual preview
ATS-POL-GBU
Brand: XTC Pages: 4
Webasto CC4E Installation And Service Instructions Manual preview
CC4E
Brand: Webasto Pages: 34
Hyundai Santa Fe 2006 Owner'S Manual preview
Santa Fe 2006
Brand: Hyundai Pages: 280
PAC Stinger ELEV8 Install Manual preview
Stinger ELEV8
Brand: PAC Pages: 14
Kolpin 98310 Product Instructions preview
98310
Brand: Kolpin Pages: 3
Fast Master Products SWIVELWHEEL-46 Assembly Instructions Manual preview
SWIVELWHEEL-46
Brand: Fast Master Products Pages: 13
JCROffroad JEEP GL ADIATOR JT TOPPER ROOF RACK Install Instructions Manual preview
JEEP GL ADIATOR JT TOPPER ROOF RACK
Brand: JCROffroad Pages: 7
Vecow IVH-9000-2R440Q User Manual preview
IVH-9000-2R440Q
Brand: Vecow Pages: 110
Volvo S90 2018 Quick Manual preview
S90 2018
Brand: Volvo Pages: 42
ECS FIA-030-B Fitting Instructions preview
FIA-030-B
Brand: ECS Pages: 4

Brands by name

Popular brands

Load more brands