background image

Action and Description

Menu Item

4. Press the 

OK

 button again when the desired selection

appears in the audio display.

5. Press the 

OK

 button or dial button to call the selection.

Access your call history log.

Call history

1.

Select the option for more.

2. Scroll to the option until call history appears. Press the

OK

 button.

3. Scroll through your call history options (incoming,

outgoing or missed).

4. Press the 

OK

 button again when the desired selection

appears in the audio display.

5. Press the 

OK

 button or dial button to call the selection.

Accessing Features Through the
Cell Phone Menu

You can access your call history,
phonebook, sent text messages as well as
access cell phone and system settings.

The system attempts to automatically
re-download your phonebook and call
history each time your cell phone connects
to the system. You must turn on the auto
download feature if your cell phone
supports it.

Note:

This is a cell phone dependent

feature.

1.

Press the 

PHONE

 button to enter the

cell phone menu.

2. Select one of the options available.

Action and Description

Menu Item

Dial a number using the audio system numeric keypad.

Dial a number

Redial the last number called (if available). Press the 

OK

button to select.

Redial

Access your downloaded phonebook.

Phonebook

1.

Press the 

OK

 button to confirm and enter. You can use

the options at the bottom of the screen to quickly access
an alphabetical category. You can also use the letters on
the keypad to jump in the list.

2. Scroll through your phonebook contacts.

360

Ranger (TKE) Vehicles Built From: 02-05-2016 Vehicles Built Up To: 04-09-2016, EB3B-19G219-AKC enGBR, First Printing

SYNC™

 (If Equipped)

Summary of Contents for RANGER 2016































































































































































































































































































































































































































































































Reviews: