manualshive.com logo in svg

Ford RANGER 2016, Owner'S Manual, Page: 409 / 478

Share
Download
Ford RANGER 2016 Owner'S Manual Download Page 409

To make adjustments using the touchscreen, select:

Action and Description

Menu Item

Press the settings icon.

Settings

Vehicle

Ambient light

•

You can then touch the desired color.

•

Use the scroll bar to increase or decrease the intensity.

•

To switch the feature on or off, press the power button.

Camera Settings

E142607

This menu allows you to access
settings for your rear view
camera.

To make adjustments using the touchscreen, select:

Action and Description

Menu Item

Press the settings icon.

Settings

Vehicle

Camera Settings

Then select from the following:

Enhanced Park Pilot

Rear Camera Delay

You can find more information on the rear view camera system in another chapter.  See

Parking Aids

 (page 152).

Enable Valet Mode

E142607

Valet mode allows you to lock
the system. No information is
accessible until the system is

unlocked with the correct PIN.

Note:

If the system locks, and you need to

reset the PIN, contact an authorized dealer.

406

Ranger (TKE) Vehicles Built From: 02-05-2016 Vehicles Built Up To: 04-09-2016, EB3B-19G219-AKC enGBR, First Printing

SYNC™ 2

 (If Equipped)

Summary of Contents for RANGER 2016































































































































































































































































































































































































































































































Reviews:

No comments