Ford RANGER 2016 Page 349 Owner'S Manual Download

Page: 349 / 478

Type 3

Press function button 2.

Note:

When an MP3 CD is playing, you can

have the system shuffle tracks for the whole
CD, or within the current folder. Pressing
function button 2 toggles these options.

Use the seek up or down button to select
the next track to shuffle, if required.

Repeat Compact Disc Tracks

Type 1

Press

REPEAT

in CD mode.

Note:

When an MP3 CD is playing, you can

have the system repeat the current track or
all tracks within the current folder.

Type 2

Press the

button and select CD

MODE.

Select

REPEAT

, which then enables the

function to be selected on or off. The track
will replay once ended.

Note:

When an MP3 CD is playing, you can

have the system repeat the current track or
all tracks within the current folder.

Type 3

Press function button 1.

Note:

When an MP3 CD is playing, you can

have the system repeat the current track or
all tracks within the current folder. Pressing
function button 1 toggles these options.

Compact Disc Track Scanning

The Scan function allows you to preview
each track for approximately 8 seconds.

Type 1

Press

CD/AUX

to select CD MODE.

Short press

SCAN/AS

button to scan CD.

Note:

When an MP3 CD is playing, you can

have the system scan tracks on the CD or
within the current folder. Pressing

SCAN/AS

button toggles these options.

Type 2

Various scan modes are possible,
according to the type of CD currently
playing.

Press the

button and select CD

MODE.

Select

SCAN

, which then enables the

function to be selected on or off.

Note:

When an MP3 CD is playing, you can

have the system scan tracks on the CD or
within the current folder. Pressing

button

toggles these options.

Type 3

Press function button 3.

Note:

When an MP3 CD is playing, you can

have the system scan tracks on the CD or
within the current folder. Pressing function
button 3 toggles these options.

MP3 File Playback

MP3 (MPEG 1 Audio Layer-3) is a standard
technology and format for compressing
audio data. This allows a more efficient
use of the media.

You can play MP3 files recorded on
CD-ROM, CD-R and CD-RW formats. The
disc must be in the ISO 9660 level 1 or level
2 format, or Joliet or Romeo in the
expansion format. You can also use a disc
recorded in multi session.

ISO 9660 Format

This is the most common international
standard for the logical format of files and
folders on a CD-ROM.

346

Ranger (TKE) Vehicles Built From: 02-05-2016 Vehicles Built Up To: 04-09-2016, EB3B-19G219-AKC enGBR, First Printing

Audio System

Summary of Contents for RANGER 2016































































































































































































































































































































































































































































































Search results

Summary of Contents for RANGER 2016

Reviews:

Related manuals for RANGER 2016

Brands by name

Popular brands

Ford RANGER 2016, Owner'S Manual

Search results

Summary of Contents for RANGER 2016

Reviews:

Related manuals for RANGER 2016

Brands by name

Popular brands