manualshive.com logo in svg

Ford RANGER 2016, Owner'S Manual

Share
Download
Ford RANGER 2016 Owner'S Manual Download Page 54

GENERAL INFORMATION

Condensation in Lamp Assemblies

Exterior lamps have vents to
accommodate normal changes in air
pressure.

Condensation can be a natural by-product
of this design. When moist air enters the
lamp assembly through the vents, there is
a possibility that condensation can occur
when the temperature is cold. When
normal condensation occurs, a fine mist
can form on the interior of the lens. The
fine mist eventually clears and exits
through the vents during normal operation.

Clearing time may take as long as 48 hours
under dry weather conditions.

Examples of acceptable condensation are:
•

The presence of a fine mist (no streaks,
drip marks or large droplets).

•

A fine mist covers less than 50% of the
lens.

Examples of unacceptable condensation
are:
•

A water puddle inside the lamp.

•

Streaks, drip marks or large droplets
present on the interior of the lens.

If you see any unacceptable condensation,
have your vehicle checked by an authorized
dealer.

LIGHTING CONTROL

Type 1

A

B

C

D

E139254

Off.

A

Auto-light control.

B

Headlamps.

C

Position lamps, instrument panel
lamps, license plate lamps and
tail lamps.

D

Type 2

E142449

Off.

A

Position lamps, instrument panel
lamps, license plate lamps and
tail lamps.

B

Headlamps.

C

51

Ranger (TKE) Vehicles Built From: 02-05-2016 Vehicles Built Up To: 04-09-2016, EB3B-19G219-AKC enGBR, First Printing

Lighting

Summary of Contents for RANGER 2016































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands