75
137
UniqUe service ProcedUres
138
139
Fuel System Service: Fuel Injector Service
NOTE: Use proper cleanliness practices
while servicing the fuel system!
NOTE: Follow the proper sercive procedures while servicing
the fuel system and always use the correct torque!
• Proper torque is crucial with the 6.4L Power
Stroke
®
Diesel’s high pressure fuel system.
• When replacing fuel injectors, always follow the
correct procedure for installation and torque.
• Always use proper protective fuel system
caps whenever a tube is removed.
• Avoid cleaning parts near fuel system components.
• Tool # 310-158 (fuel caps)
Fuel System Service: Fuel Injector Lubrication
NOTE: Use proper cleanliness practices
while servicing the fuel system!
• Always replace the O-ring and the steel gasket at the
tip of the injector when reinstalling an injector. New
injectors come with these items already installed.
• Always lightly lubricate the new O-ring with
clean engine oil prior to assembly.
Fuel System Service: Removing
and Installing Injector Gasket
NOTE: Use proper cleanliness practices
while servicing the fuel system!
• To remove the gasket, use a razor blade to get between the
gasket and injector body, then slowly work the gasket off.
• To install the new gasket, use a 9mm 12 point
deep well socket and press the gasket on
by hand making sure it is fully seated.
• Make sure the gasket is installed correctly.
The raised portion of the gasket should be
facing away from the injector body.
Summary of Contents for 6.4L Power Stroke
