Ford 2011 Focus Owner'S Manual Download Page 28

Page: 28 / 301

SEEK/TRACK:

Press

SEEK/TRACK

to access the

previous/next track.

CAT (Category) / FOLD (Folder):

In MP3 mode only–

Press CAT/FOLD and then press

SEEK/TRACK

to access the previous/next folder.

SCAN:

Press for a brief sampling of all tracks on the current disc or

MP3

folder.

DIRECT:

In CD mode–

Press DIRECT. The display will read DIRECT TRACK

MODE SELECT TRACK. Enter the desired track number using the
memory preset buttons (0–9). The system will then begin playing that
track.

In MP3 folder mode–

Press DIRECT and the memory preset buttons

(0–9) of the desired folder. The system will advance to that specific
folder.

TEXT:

In MP3 mode only–

Press TEXT repeatedly to view Album (AL), Folder

(FL), Song (SO) and Artist (AR) in the display, if available.

In TEXT MODE:

Sometimes the display requires additional text to be

displayed. When the < / > indicator is active, press TEXT and then
press

SEEK/TRACK

to view the additional display text.

COMPRESSION:

Press MENU repeatedly until COMPRESSION ON/OFF

appears in the display. Use

SEEK/TRACK

to switch between

ON/OFF. When COMPRESSION is ON, the system will bring the soft and
loud CD passages together for a more consistent listening level.

SHUFFLE:

Press MENU repeatedly until SHUFFLE ON/OFF appears in

the display. Use

SEEK/TRACK

to switch between ON/OFF. If

you wish to engage shuffle mode right away, press
SEEK/TRACK

to begin random play. Otherwise, random play will

begin when the current track is finished playing. The system will only
shuffle the currently playing disc.

Entertainment Systems

2011 Focus

(foc)

Owners Guide, 1st Printing
USA

(fus)

Summary of Contents for 2011 Focus














































































































































































































































































































Search results

Summary of Contents for 2011 Focus

Reviews:

Related manuals for 2011 Focus

Brands by name

Popular brands

Ford 2011 Focus, Owner'S Manual

Search results

Summary of Contents for 2011 Focus

Reviews:

Related manuals for 2011 Focus

Brands by name

Popular brands