manualshive.com logo in svg

Ford 2011 Focus, Owner'S Manual

The Ford 2011 Focus is a stylish and efficient vehicle that combines sleek design with impressive performance. With our user-friendly website, you can easily access a free download of the brochure and specs manual for this model, providing you with all the necessary information to enhance your driving experience. Download it now from manualshive.com.

Share
Download
background image

WARNING:

If the side air

curtain has deployed,

the

air curtain will not function
again. The side air curtain
system (including the A, B and
C pillar trim and headliner)
must be inspected and serviced
by an authorized dealer.

If the

air curtain is not replaced, the
unrepaired area will increase the
risk of injury in a collision.

Determining if the system is operational

The SRS uses a readiness light in the instrument cluster or a tone to
indicate the condition of the system. Refer to

Warning lights and

chimes

in the

Instrument Cluster

chapter. Routine maintenance of the

side airbag is not required.

A difficulty with the system is indicated by one or more of the following:

•

The readiness light (same light as for front airbag system) will either
flash or stay lit.

•

The readiness light will not illuminate immediately after ignition is
turned on.

•

A series of five beeps will be heard. The tone pattern will repeat
periodically until the problem and/or light are repaired.

If any of these things happen, even intermittently, have the SRS serviced
at your authorized dealer immediately. Unless serviced, the system may
not function properly in the event of a collision.

SOS Post-Crash Alert System™

The system automatically flashes the turn signal lamps and sounds the
horn three times at four second intervals in the event of a serious impact
that deploys an airbag (front, side, side curtain or Safety Canopy

威

) or

the safety belt pretensioners.

The system can be turned off when any one of the following actions are
taken by the driver or any other person:

•

pressing the hazard control button,

•

or pressing the panic button on the remote entry transmitter.

Seating and Safety Restraints

124

2011 Focus

(foc)

Owners Guide, 1st Printing
USA

(fus)

Summary of Contents for 2011 Focus














































































































































































































































































































Reviews:

No comments

Related manuals for 2011 Focus

Ecco Gemineye EC2014-C Installation Instructions Manual preview
Gemineye EC2014-C
Brand: Ecco Pages: 10
Ecco Reflex 5500 Series Installation And Operating Instructions Manual preview
Reflex 5500 Series
Brand: Ecco Pages: 12
Jeep 2011 grand cherokee Accessories Quick Reference Manual preview
2011 grand cherokee
Brand: Jeep Pages: 22
Jeep 2013 Grand Cherokee Owner'S Manual preview
2013 Grand Cherokee
Brand: Jeep Pages: 704
Jeep 2012 Liberty Owner'S Manual preview
2012 Liberty
Brand: Jeep Pages: 558
DEFA WarmUp 411702 Fitting Instructions Manual preview
WarmUp 411702
Brand: DEFA Pages: 9
rough country Slim Line LED Light Grille Kit Manual preview
Slim Line LED Light Grille Kit
Brand: rough country Pages: 8
Subaru 2005 Baja Owner'S Manual preview
2005 Baja
Brand: Subaru Pages: 34
TATA Motors tigor Owner'S Manual preview
tigor
Brand: TATA Motors Pages: 159
Parkeon StradaPAL Installation Manual preview
StradaPAL
Brand: Parkeon Pages: 43
Mercedes-Benz Vito Taxi 2011 Operation Manual preview
Vito Taxi 2011
Brand: Mercedes-Benz Pages: 10
FORM FIT 8F 00 Installation Instructions preview
8F 00
Brand: FORM FIT Pages: 2
Smappee EVB-1332-BL-E Installation Manual preview
EVB-1332-BL-E
Brand: Smappee Pages: 28
Alfa Romeo Stelvio 2019 User Manual preview
Stelvio 2019
Brand: Alfa Romeo Pages: 268
Jeep 2018 GRAND CHEROKEE User Manual preview
2018 GRAND CHEROKEE
Brand: Jeep Pages: 372
Honda Civic Coupe 2009 Owner'S Manual preview
Civic Coupe 2009
Brand: Honda Pages: 414
Subaru Forester 2.5X 2003 Technicians Reference Booklet preview
Forester 2.5X 2003
Brand: Subaru Pages: 44
Digi-tails 1981-83 MALIBU Installation Manual preview
1981-83 MALIBU
Brand: Digi-tails Pages: 7

Brands by name

Popular brands

Load more brands