manualshive.com logo in svg

Ford 2011 Focus, Owner'S Manual

The Ford 2011 Focus is a stylish and efficient vehicle that combines sleek design with impressive performance. With our user-friendly website, you can easily access a free download of the brochure and specs manual for this model, providing you with all the necessary information to enhance your driving experience. Download it now from manualshive.com.

Share
Download
background image

Satellite Radio (if equipped)

Satellite radio is available only with a valid SIRIUS radio
subscription. Check with your authorized dealer for availability.

SIRIUS:

Press repeatedly to access satellite radio mode, if equipped.

Press repeatedly to cycle through SAT1, SAT2 and SAT3 modes.

TUNE/OK:

Turn the knob to go to

the next / previous available SIRIUS
satellite station.

DIRECT:

Press DIRECT then enter the desired channel (i.e. 002) using

the memory preset buttons (0–9). If you only enter one digit, press OK
and the system will go to that satellite channel. If you enter three digits,
the system will automatically go to that channel, if available. You may
cancel your entry by pressing DIRECT. If an invalid station number is
entered, INVALID CHANNEL will appear in the display and the system
will continue playing the current station.

SEEK/TRACK:

Press

SEEK/TRACK

to seek to the

previous/next channel. If a specific
category is selected, (Jazz, Rock,
News, etc.), press
SEEK/TRACK

to seek to the

previous/next channel in the selected category. Press and hold
SEEK/TRACK

to fast seek through the previous/next channels.

SCAN:

Press SCAN for a brief sampling of all available SIRIUS satellite

channels. If a specific category is selected, (Jazz, Rock, News, etc.) press
SCAN for a brief sampling of all available SIRIUS satellite channels within
the selected category.

MEMORY PRESETS (0–9):

There

are 30 available presets, 10 each for
SAT1, SAT2 and SAT3. To save
satellite channels in your memory
presets, tune to the desired channel
then press and hold a memory preset number (0–9) until sound returns.

TEXT:

Press and release to display the artist and song title. While in

TEXT MODE, press again to scroll through the Artist (AR), Song (SO),
Channel (CH) and Category (CA).

Entertainment Systems

29

2011 Focus

(foc)

Owners Guide, 1st Printing
USA

(fus)

Summary of Contents for 2011 Focus














































































































































































































































































































Reviews:

No comments

Related manuals for 2011 Focus

Camcar 40052 Mounting Instructions preview
40052
Brand: Camcar Pages: 6
FANATEC Porsche 911 Turbo S Wheel Developer Quick Manual preview
Porsche 911 Turbo S Wheel
Brand: FANATEC Pages: 9
HALE MM-03 Driver Manual preview
MM-03
Brand: HALE Pages: 44
Alpine KCE-G7QI Installation preview
KCE-G7QI
Brand: Alpine Pages: 2
Whispbar K896W Fitting Instructions Manual preview
K896W
Brand: Whispbar Pages: 15
Wagan Road Ready Seat Protector User Manual preview
Road Ready Seat Protector
Brand: Wagan Pages: 12
Chevrolet 2016 Suburban Owner'S Manual preview
2016 Suburban
Brand: Chevrolet Pages: 50
Cadillac 2007 SRX Owner'S Manual preview
2007 SRX
Brand: Cadillac Pages: 522
Subaru Impreza 2.5GT Specifications preview
Impreza 2.5GT
Brand: Subaru Pages: 2
Subaru 1999 Impreza Owner'S Manual preview
1999 Impreza
Brand: Subaru Pages: 328
Skoda Superb 2006 Owner'S Manual preview
Superb 2006
Brand: Skoda Pages: 281
Oldsmobile 1998 Aurora Owner'S Manual preview
1998 Aurora
Brand: Oldsmobile Pages: 380
A-Tach Mounts 50232 Instructions preview
50232
Brand: A-Tach Mounts Pages: 2
POOL-LINE 110085 Assembly Instructions preview
110085
Brand: POOL-LINE Pages: 2
Vauxhall 2013 Ampera Infotainment Manual preview
2013 Ampera
Brand: Vauxhall Pages: 95
Autoplugin RCP-B1 Installation Manual preview
RCP-B1
Brand: Autoplugin Pages: 8
Ford 2000 F 350 Owner'S Manual preview
2000 F 350
Brand: Ford Pages: 256
Metra Electronics 99-9302 Installation Instructions Manual preview
99-9302
Brand: Metra Electronics Pages: 8

Brands by name

Popular brands

Load more brands