manualshive.com logo in svg

Ford 2011 Focus, Owner'S Manual

The Ford 2011 Focus is a stylish and efficient vehicle that combines sleek design with impressive performance. With our user-friendly website, you can easily access a free download of the brochure and specs manual for this model, providing you with all the necessary information to enhance your driving experience. Download it now from manualshive.com.

Share
Download
background image

FUEL PUMP SHUT-OFF SWITCH

This device stops the electric fuel pump from sending fuel to the engine
when your vehicle has had a substantial jolt.

After an accident, if the engine cranks but does not start, this switch
may have been activated.

This switch is located in the front
passenger’s footwell, behind the kick
panel access cover.

To reset the switch:

1. Turn the ignition off.

2. Check the fuel system for leaks.

3. If no leaks are apparent, reset the
switch by pressing in on the reset
button.

4. Turn the ignition to the on position.

5. Wait a few seconds and return the key to off.

6. Make another check for leaks.

FUSES AND RELAYS

Fuses

If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.

Note:

Always replace a fuse with one that has the specified amperage

rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.

15

Roadside Emergencies

192

2011 Focus

(foc)

Owners Guide, 1st Printing
USA

(fus)

Summary of Contents for 2011 Focus














































































































































































































































































































Reviews:

No comments

Related manuals for 2011 Focus

ZAPTEC Go Instruction Manual preview
Go
Brand: ZAPTEC Pages: 240
Vauxhall Meriva Quick Reference Manual preview
Meriva
Brand: Vauxhall Pages: 2
Vauxhall Ampera Quick Reference Manual preview
Ampera
Brand: Vauxhall Pages: 2
Vauxhall 2012 Agila Quick Reference Manual preview
2012 Agila
Brand: Vauxhall Pages: 2
Vauxhall 2013 Mokka Owner'S Manual preview
2013 Mokka
Brand: Vauxhall Pages: 209
VBC Racing WildFire Instruction Manual preview
WildFire
Brand: VBC Racing Pages: 34
Vauxhall 2013 Corsa Infotainment system Quick Reference Manual preview
2013 Corsa Infotainment system
Brand: Vauxhall Pages: 2
Vauxhall 2010 Astra Quick Reference Manual preview
2010 Astra
Brand: Vauxhall Pages: 2
Vauxhall Antara Owner'S Manual preview
Antara
Brand: Vauxhall Pages: 236
AccuAir AA-4397 Installation Manual preview
AA-4397
Brand: AccuAir Pages: 40
Peak PKC0RG Owner'S Manual preview
PKC0RG
Brand: Peak Pages: 10
WABCO TP19108 Installation Manual preview
TP19108
Brand: WABCO Pages: 32
minnid 1.240.344 Operating Instructions Manual preview
1.240.344
Brand: minnid Pages: 44
Alfa Romeo Alfa 147 Quick Start Manual preview
Alfa 147
Brand: Alfa Romeo Pages: 8
Cadillac 1999 DeVille Owner'S Manual preview
1999 DeVille
Brand: Cadillac Pages: 368
Luverne 205760 Installation Instructions preview
205760
Brand: Luverne Pages: 3
Navman B2+ User Manual preview
B2+
Brand: Navman Pages: 27
Carcomm CHFS-34 HTC Installation Manual preview
CHFS-34 HTC
Brand: Carcomm Pages: 2

Brands by name

Popular brands

Load more brands