manualshive.com logo in svg

Ford 2011 Focus, Owner'S Manual

The Ford 2011 Focus is a stylish and efficient vehicle that combines sleek design with impressive performance. With our user-friendly website, you can easily access a free download of the brochure and specs manual for this model, providing you with all the necessary information to enhance your driving experience. Download it now from manualshive.com.

Share
Download
background image

To have full capacity usage of your power point, the engine is required to
be running to avoid unintentional discharge of the battery. To prevent
the battery from being discharged:

•

do not use the power point longer than necessary when the engine is
not running,

•

do not leave battery chargers, video game adapters, computers and
other devices plugged in overnight or when the vehicle is parked for
extended periods.

Always keep the power point caps closed when not being used.

POWER WINDOWS

WARNING:

Do not leave children unattended in the vehicle and

do not let children play with the power windows. They may

seriously injure themselves.

WARNING:

When closing the power windows, you should verify

they are free of obstructions and ensure that children and/or

pets are not in the proximity of the window openings.

Press and pull the window switches
to open and close windows.

•

Press down (to the first detent)
and hold the switch to open.

•

Pull up (to the first detent) and
hold the switch to close.

One-touch down

Allows the driver’s window to open fully without holding the control
down. Press the switch completely down to the second detent and
release quickly. The window will open fully. Momentarily press the switch
to any position to stop the window operation.

Driver Controls

60

2011 Focus

(foc)

Owners Guide, 1st Printing
USA

(fus)

Summary of Contents for 2011 Focus














































































































































































































































































































Reviews:

No comments

Related manuals for 2011 Focus

AA Products X31 Instruction Manual preview
X31
Brand: AA Products Pages: 6
Eclipse AVN 2210p mkII Operation Manual preview
AVN 2210p mkII
Brand: Eclipse Pages: 6
Pivot DXB-B User Manual preview
DXB-B
Brand: Pivot Pages: 4
Cequent 10417 Instruction Sheets preview
10417
Brand: Cequent Pages: 9
Whispbar K448W Fitting Instructions Manual preview
K448W
Brand: Whispbar Pages: 15
Maserati Gransport Owner'S Manual preview
Gransport
Brand: Maserati Pages: 210
OnStar liveon Owner'S Manual preview
liveon
Brand: OnStar Pages: 22
Chevrolet 1999 Malibu Owner'S Manual preview
1999 Malibu
Brand: Chevrolet Pages: 344
Prorack K692 Fitting Instructions Manual preview
K692
Brand: Prorack Pages: 15
Whispbar K678W Fitting Instructions Manual preview
K678W
Brand: Whispbar Pages: 14
Whispbar K919W Fitting Instructions Manual preview
K919W
Brand: Whispbar Pages: 17
Jeep Cherokee 1977 Owner'S Manual preview
Cherokee 1977
Brand: Jeep Pages: 136
Kuda 079020 Installation Instruction preview
079020
Brand: Kuda Pages: 2
VER-MAC PCMS Series Operation, Safety And Maintenance Manual preview
PCMS Series
Brand: VER-MAC Pages: 64
rockymounts SplitRailLS Installation Instructions Manual preview
SplitRailLS
Brand: rockymounts Pages: 6
Whelen Engineering Company LED Dominator TAM83S2 Installation Manual preview
LED Dominator TAM83S2
Brand: Whelen Engineering Company Pages: 2
Westin 28-0160 Instructions preview
28-0160
Brand: Westin Pages: 3
Haltech PLATINUM HT051202 Quick Start Manual preview
PLATINUM HT051202
Brand: Haltech Pages: 10

Brands by name

Popular brands

Load more brands