Ford 2010 Flex Owner'S Manual Download Page 74

Page: 74 / 397

DUAL ZONE AUTOMATIC TEMPERATURE CONTROL
(NAVIGATION BASED–IF EQUIPPED)

Temperature conversion:

To switch between Fahrenheit and Celsius,

refer to

Message center

in the

Instrument Cluster

chapter.

Climate:

Press to control the climate control system through the

touch display screen. See

Touchscreen functions

later in this section.

Rear defroster:

Press to activate/deactivate the rear window

defroster. Refer to

Rear window defroster

later in this chapter for more

information. If your vehicle is equipped with heated mirrors, the same
button will activate both.

A/C:

Press to activate/deactivate air conditioning. Use with

recirculated air to improve cooling performance and efficiency. A/C

engages automatically in MAX A/C,

(defrost) and

(floor/defrost).

Passenger temperature:

Press to activate separate passenger

temperature control and increase/decrease the air temperature on the
passenger side of the vehicle.

Climate Controls

2010 Flex

(471)

Owners Guide, 1st Printing
USA

(fus)

Summary of Contents for 2010 Flex














































































































































































































































































































































































































Search results

Summary of Contents for 2010 Flex

Reviews:

Ford 2010 Flex, Owner'S Manual, Page: 74 / 397

Search results

Summary of Contents for 2010 Flex

Reviews: