Ford 2010 Flex Page 24 Owner'S Manual Download

Page: 24 / 397

TIRE PRESSURE SENSOR FAULT

— Displayed when a tire pressure

sensor is malfunctioning, or your spare tire is in use. For more
information on how the system operates under these conditions, refer to

Tire Pressure Monitoring System (TPMS)

in the

Tires, Wheels and

Loading

chapter. If the warning stays on or continues to come on,

contact your authorized dealer as soon as possible.

POWER STEERING ASSIST FAULT

— The power steering system

has disabled power steering assist due to a system error; service is
required.

SERVICE POWER STEERING

— The power steering system has

detected a condition that requires service.

SERVICE POWER STEERING NOW

— The power steering system

has detected a condition that requires service immediately.

OIL LIFE CHANGE SOON

— Displayed when the engine oil life

remaining is 10% or less.

OIL CHANGE REQUIRED

— Displayed when the oil life left reaches

0%.

INTKEY COULD NOT PROGRAM

— Displayed when an attempt is

made to program a fifth integrated key to the remote key entry system.
For more information on integrated key, refer to the

Locks and Security

chapter in this manual.

TRAILER SWAY REDUCE SPEED (if equipped)

— Displayed when

the trailer sway control has detected trailer sway. For more information,
refer to the

Driving

chapter for more information.

ACTIVE PARK FAULT (if equipped)

— Displayed when a fault has

occurred with the active park assist system. Refer to

Active park assist

in the

Driving

chapter for more information.

ACTIVE PARK CANCELLED (if equipped)

— Displayed when the

active park assist feature has been canceled when it is in use. Refer to

Active park assist

in the

Driving

chapter for more information.

CANCELLED BY OVER SPEED (if equipped)

— Displayed when the

active park assist feature self cancels due to vehicle speed over the
preset limit allowed by the active park assist system. Refer to

Active

park assist

in the

Driving

chapter for more information.

CANCELLED BY DRIVER INPUT (if equipped)

— Displayed when

the autopark feature has been canceled due to driver inputs. Refer to

Active park assist

in the

Driving

chapter for more information.

Instrument Cluster

2010 Flex

(471)

Owners Guide, 1st Printing
USA

(fus)

Summary of Contents for 2010 Flex














































































































































































































































































































































































































Search results

Summary of Contents for 2010 Flex

Reviews:

Related manuals for 2010 Flex

Brands by name

Popular brands

Ford 2010 Flex, Owner'S Manual

Search results

Summary of Contents for 2010 Flex

Reviews:

Related manuals for 2010 Flex

Brands by name

Popular brands