Ford 2010 Flex Page 349 Owner'S Manual Download

Page: 349 / 397

4. Attach the new wiper to the
wiper arm and press it into place
until a click is heard.

If you find this procedure too
difficult, please see your dealer.

ENGINE OIL

Checking the engine oil

Refer to the

scheduled maintenance information

for the appropriate

intervals for checking the engine oil.

1. Make sure the vehicle is on level ground.

2. Turn the engine off and wait 15 minutes for the oil to drain into the
oil pan.

3. Set the parking brake and ensure the gearshift is securely latched in P
(Park).

4. Open the hood. Protect yourself from engine heat.

5. Locate and carefully remove the
engine oil level dipstick.

6. Wipe the dipstick clean. Insert the dipstick fully, then remove it again.

•

If the oil level is

within this

range,

the oil level is acceptable.

DO NOT ADD OIL.

Maintenance and Specifications

349

2010 Flex

(471)

Owners Guide, 1st Printing
USA

(fus)

Summary of Contents for 2010 Flex














































































































































































































































































































































































































Search results

Summary of Contents for 2010 Flex

Reviews:

Related manuals for 2010 Flex

Brands by name

Popular brands

Ford 2010 Flex, Owner'S Manual

Search results

Summary of Contents for 2010 Flex

Reviews:

Related manuals for 2010 Flex

Brands by name

Popular brands