Ford 2010 Flex Owner'S Manual Download Page 234

Page: 234 / 397

Additional information contained on the tire sidewall for “LT” type
tires

“LT” type tires have some additional
information beyond those of “P”
type tires; these differences are
described below.

Note:

Tire Quality Grades do not

apply to this type of tire.

LT:

Indicates a tire, designated by

the Tire and Rim Association
(T&RA), that is intended for service
on light trucks.

Load Range/Load Inflation

Limits:

Indicates the tire’s

load-carrying capabilities and its
inflation limits.

Maximum Load Dual lb (kg) at psi (kPa) cold:

Indicates the

maximum load and tire pressure when the tire is used as a dual; defined
as four tires on the rear axle (a total of six or more tires on the vehicle).

Maximum Load Single lb (kg) at psi (kPa) cold:

Indicates the

maximum load and tire pressure when the tire is used as a single;
defined as two tires (total) on the rear axle.

Tires, Wheels and Loading

234

2010 Flex

(471)

Owners Guide, 1st Printing
USA

(fus)

Summary of Contents for 2010 Flex














































































































































































































































































































































































































Search results

Summary of Contents for 2010 Flex

Reviews:

Brands by name

Popular brands

Ford 2010 Flex, Owner'S Manual

Search results

Summary of Contents for 2010 Flex

Reviews:

Brands by name

Popular brands