manualshive.com logo in svg

Ford 2010 Flex, Owner'S Manual

The Ford 2010 Flex Owner's Manual is a comprehensive guide that provides detailed information about operating and maintaining your vehicle. Available for free download at manualshive.com, this manual offers essential instructions and helpful tips to ensure a smooth and enjoyable ownership experience of your Ford 2010 Flex.

Share
Download
background image

WARNING:

To reduce the risk of possible serious injury:

Do not stow objects in seat back map pocket (if equipped) or

hang objects off seat back if a child is in the front passenger seat.
Do not place objects underneath the front passenger seat or between
the seat and the center console (if equipped).
Check the “passenger airbag off” or “pass airbag off” indicator lamp for
proper airbag Status.
Failure to follow these instructions may interfere with the front
passenger seat sensing system.

In case there is a problem with the
front passenger sensing system, the
airbag readiness lamp in the
instrument cluster will stay lit.

If the airbag readiness lamp is lit, do the following:

The driver and/or adult passengers should check for any objects that
may be lodged underneath the front passenger seat or cargo interfering
with the seat.

If objects are lodged and/or cargo is interfering with the seat; please take
the following steps to remove the obstruction:

•

Pull the vehicle over.

•

Turn the vehicle off.

•

Driver and/or adult passengers should check for any objects lodged
underneath the front passenger seat or cargo interfering with the seat.

•

Remove the obstruction(s) (if found).

•

Restart the vehicle.

•

Wait at least two minutes and verify that the airbag readiness lamp is
no longer illuminated

•

If the airbag readiness lamp remains illuminated, this may or may/not
be a problem due to the front passenger sensing system.

DO NOT attempt to repair or service the system; take your vehicle
immediately to an authorized dealer.

If it is necessary to modify an advanced front airbag system to
accommodate a person with disabilities, contact the Ford Customer
Relationship Center at the phone number shown in the

Customer

Assistance

chapter of this Owner’s Guide.

Seating and Safety Restraints

192

2010 Flex

(471)

Owners Guide, 1st Printing
USA

(fus)

Summary of Contents for 2010 Flex














































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2010 Flex

Kargo Master 80070 Assembly Lnstructions preview
80070
Brand: Kargo Master Pages: 13
Kargo Master 4A96L Installation Manual preview
4A96L
Brand: Kargo Master Pages: 21
Kargo Master 40201 Installation Manual preview
40201
Brand: Kargo Master Pages: 4
Cargo Floor CF500 SL-2 Replacement Instructions Manual preview
CF500 SL-2
Brand: Cargo Floor Pages: 16
Ford Focus ST 2018 Supplement Manual preview
Focus ST 2018
Brand: Ford Pages: 38
CITROËN C4 CACTUS Handbook preview
C4 CACTUS
Brand: CITROËN Pages: 301
Thule Kit 2161 Fitting Instructions preview
Kit 2161
Brand: Thule Pages: 2
TATA Motors TIGOR EV 2021 Owner'S Manual preview
TIGOR EV 2021
Brand: TATA Motors Pages: 236
VDO RUDDER ANGLE INDICATOR Installation Instructions Manual preview
RUDDER ANGLE INDICATOR
Brand: VDO Pages: 8
Chevrolet 1996 Cavalier Owner'S Manual preview
1996 Cavalier
Brand: Chevrolet Pages: 372
Weltmann KFZ-Teile 9B500016 Fitting Instructions Manual preview
9B500016
Brand: Weltmann KFZ-Teile Pages: 12
FALCON RIDGE Bobcat 3400 Instructions For Installation And Care preview
Bobcat 3400
Brand: FALCON RIDGE Pages: 4
Horn Tools HJIMRR02FIT Mounting Instructions preview
HJIMRR02FIT
Brand: Horn Tools Pages: 12
Prorack K947 Fitting Instructions Manual preview
K947
Brand: Prorack Pages: 14
iQOS CCU01 Safety Warnings And Instructions preview
CCU01
Brand: iQOS Pages: 4
Bracketron Multi Vehicle Mount MVM-35-05 Installation Manual preview
Multi Vehicle Mount MVM-35-05
Brand: Bracketron Pages: 4
Subaru S0A367010 Installation Instructions preview
S0A367010
Brand: Subaru Pages: 2
TracRac TracVan Double Installation Instructions Manual preview
TracVan Double
Brand: TracRac Pages: 6

Brands by name

Popular brands

Load more brands