Ford 2010 Flex Owner'S Manual Download Page 265

Page: 265 / 397

During Electronic Stability Control events the “sliding car” icon

in the

instrument cluster will flash.

Certain adverse driving maneuvers may activate the Electronic Stability
Control system, which include but are not limited to:

•

Taking a turn too fast

•

Maneuvering quickly to avoid an accident, pedestrian or obstacle

•

Driving over a patch of ice or other slippery surfaces

•

Changing lanes on a snow-rutted road

•

Entering a snow-free road from a snow-covered side street, or vice
versa

•

Entering a paved road from a gravel road, or vice versa

•

Cornering while towing a heavily loaded trailer (refer to

Trailer

towing

in the

Tires, Wheels and Loading

chapter).

Roll Stability Control™ (RSC

威

)

Roll Stability Control (RSC

威

) may help to maintain roll stability of the

vehicle during adverse maneuvers. RSC

威

operates by detecting the

vehicle’s roll motion and the rate at which it changes and by applying the
brakes to one or more wheels individually.

During an event that activates the Roll Stability Control™ (RSC

威

) the

“sliding car” icon

in the instrument cluster will flash.

Certain adverse driving maneuvers may activate the Roll Stability Control
system, which include:

•

Emergency lane-change

•

Taking a turn too fast

•

Quick maneuvering to avoid an accident, pedestrian or obstacle

Switching off Traction Control

If the vehicle is stuck in snow, mud or sand, and seems to lose engine
power, switching off the Traction Control feature of the AdvanceTrac

威

with RSC

威

system may be beneficial because the wheels are allowed to

spin. This will restore full engine power and will enhance momentum
through the obstacle.

To switch off the Traction Control
press the AdvanceTrac

威

with RSC

威

“Off” button. Full features of the
Traction Control can be restored by
pressing the AdvanceTrac

威

with RSC

威

“Off” button again or by turning

off and restarting the engine.

Driving

265

2010 Flex

(471)

Owners Guide, 1st Printing
USA

(fus)

Summary of Contents for 2010 Flex














































































































































































































































































































































































































Search results

Summary of Contents for 2010 Flex

Reviews:

Brands by name

Popular brands

Ford 2010 Flex, Owner'S Manual

Search results

Summary of Contents for 2010 Flex

Reviews:

Brands by name

Popular brands