Ford 2010 Flex Page 343 Owner'S Manual Download

Page: 343 / 397

SERVICE RECOMMENDATIONS

To help you service your vehicle, we provide

scheduled maintenance

information

which makes tracking routine service easy.

If your vehicle requires professional service, your authorized dealer can
provide the necessary parts and service. Check your

Warranty

Guide/Customer Information Guide

to find out which parts and

services are covered.

Use only recommended fuels, lubricants, fluids and service parts
conforming to specifications. Motorcraft

威

parts are designed and built to

provide the best performance in your vehicle.

PRECAUTIONS WHEN SERVICING YOUR VEHICLE

•

Do not work on a hot engine.

•

Make sure that nothing gets caught in moving parts.

•

Do not work on a vehicle with the engine running in an enclosed
space, unless you are sure you have enough ventilation.

•

Keep all open flames and other burning material (such as cigarettes)
away from the battery and all fuel related parts.

Working with the engine off

1. Set the parking brake and shift to P (Park).

2. Turn off the engine and remove the key.

3. Block the wheels.

Working with the engine on

1. Set the parking brake and shift to P (Park).

2. Block the wheels.

WARNING:

To reduce the risk of vehicle damage and/or

personal burn injuries, do not start your engine with the air

cleaner removed and do not remove it while the engine is running.

Maintenance and Specifications

343

2010 Flex

(471)

Owners Guide, 1st Printing
USA

(fus)

Summary of Contents for 2010 Flex














































































































































































































































































































































































































Search results

Summary of Contents for 2010 Flex

Reviews:

Related manuals for 2010 Flex

Brands by name

Popular brands

Ford 2010 Flex, Owner'S Manual

Search results

Summary of Contents for 2010 Flex

Reviews:

Related manuals for 2010 Flex

Brands by name

Popular brands