Ford 2006 Freestyle Page 137 User Manual Download | Manualshive

Page: 137 / 288

background image

•

diagnostic module.

•

and the electrical wiring which connects the components.

The diagnostic module monitors its own internal circuits and the
supplemental airbag electrical system wiring (including the impact
sensors), the system wiring, the airbag system readiness light, the airbag
back up power and the airbag ignitors.

Front passenger sensing system

The front passenger sensing system is designed to meet the regulatory
requirements of Federal Motor Vehicle Safety Standard (FMVSS) 208
and is designed to disable (will not inflate) the front passenger’s frontal
airbag under certain conditions.

The front passenger sensing system works with sensors that are part of
the front passenger’s seat and safety belt. The sensors are designed to
detect the presence of a properly seated occupant and determine if the
front passenger’s frontal airbag should be enabled (may inflate) or
disabled (will not inflate).

The front passenger sensing system will disable (will not inflate) the
front passenger’s frontal airbag if:

•

the front passenger seat is unoccupied, or has small/medium objects in
the front seat,

•

the system determines that an infant is present in a rear-facing infant
seat that is installed according to the manufacturer’s instructions,

•

the system determines that a small child is present in a forward-facing
child restraint that is installed according to the manufacturer’s
instructions,

•

the system determines that a small child is present in a booster seat,

•

a front passenger takes his/her weight off of the seat for a period of
time,

•

a child or a small person occupies the front passenger seat.

For side airbag equipped vehicles, the front passenger sensing system
will turn off the passenger seat side airbag if:

•

the seat is empty and safety belt is unbuckled.

The front passenger sensing system
uses a

⬙

passenger airbag off

⬙

or

⬙

pass airbag off

⬙

indicator which will

illuminate and stay lit to remind you

2006 Freestyle (219)
Owners Guide (post-2002-fmt)
USA (fus)

Seating and Safety Restraints

137

«
...
135
136
137
138
139
...
»

Summary of Contents for 2006 Freestyle

































































































































































































































































































Reviews:

No comments

Related manuals for 2006 Freestyle

Brand: Mazdaspeed Pages: 8

Brand: Edelbrock Pages: 1

Brand: FORM FIT Pages: 2

Brand: Great Wall Pages: 18

Brand: WIX Pages: 2

Brand: Camoplast Pages: 19

Brand: Billien Pages: 2

Brand: Lexus Pages: 28

Brand: TracRac Pages: 8

PRO-FLO XT 3527

Brand: Edelbrock Pages: 39

Brand: Kargo Master Pages: 9

Brand: Ultraplast Pages: 5

Brand: FAAFTECH Pages: 2

Brand: XTC Pages: 2

Brand: Prorack Pages: 14

Brand: DV8 Pages: 4

Brand: Kia Pages: 38

Brand: SportRack Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands