Ford 2006 Freestyle Page 63 User Manual Download

Page: 63 / 288

ILLUMINATED VISOR MIRROR (IF EQUIPPED)

Lift the mirror cover to turn on the
visor mirror lamp. The visor will
slide back and forth on the rod for
increased sunlight coverage.

Slide on rod feature

Rotate the visor towards the side
window and extend it rearward for
additional sunlight coverage.

Note:

To stow the visor back into

the headliner, visor must be
retracted before moving it back
towards the windshield.

INSTRUMENT PANEL STORAGE COMPARTMENT

The storage compartment may be
used to secure sunglasses or similar
sized objects. Press the control to
open the storage compartment.

OVERHEAD CONSOLE

The appearance of your vehicle’s overhead console will vary according to
your option package.

2006 Freestyle (219)
Owners Guide (post-2002-fmt)
USA (fus)

Driver Controls

Summary of Contents for 2006 Freestyle

































































































































































































































































































Search results

Summary of Contents for 2006 Freestyle

Reviews:

Related manuals for 2006 Freestyle

Brands by name

Popular brands

Ford 2006 Freestyle, User Manual

Search results

Summary of Contents for 2006 Freestyle

Reviews:

Related manuals for 2006 Freestyle

Brands by name

Popular brands