Ford 2006 Freestyle Page 14 User Manual Download

Page: 14 / 288

GAUGES

Speedometer:

Indicates the

current vehicle speed.

Engine coolant temperature
gauge:

Indicates engine coolant

temperature. At normal operating
temperature, the needle will be in
the normal range (between “H” and
“C”).

If it enters the red section,

the engine is overheating. Stop
the vehicle as soon as safely
possible, switch off the engine and let the engine cool.

Never remove the coolant reservoir cap while the engine is
running or hot.

2006 Freestyle (219)
Owners Guide (post-2002-fmt)
USA (fus)

Instrument Cluster

Summary of Contents for 2006 Freestyle

































































































































































































































































































Search results

Summary of Contents for 2006 Freestyle

Reviews:

Related manuals for 2006 Freestyle

Brands by name

Popular brands

Ford 2006 Freestyle, User Manual

Search results

Summary of Contents for 2006 Freestyle

Reviews:

Related manuals for 2006 Freestyle

Brands by name

Popular brands