manualshive.com logo in svg

Ford 2006 Freestyle, User Manual

The user manual for the noteworthy Ford 2006 Freestyle is now available for free download on manualshive.com, ensuring easy access to essential information about this exceptional vehicle model. This comprehensive manual provides step-by-step guidance, enabling users to better understand and utilize the features and functions of their Ford 2006 Freestyle.

Share
Download
background image

Do not add engine coolant when the engine is hot. Steam and
scalding liquids released from a hot cooling system can burn you

badly. Also, you can be burned if you spill coolant on hot engine parts.

Do not put engine coolant in the windshield washer fluid
container. If sprayed on the windshield, engine coolant could

make it difficult to see through the windshield.

•

Add Motorcraft Premium Gold Engine Coolant
(yellow-colored), VC-7-A (U.S., except CA, OR, and NM),
VC-7-B (CA, OR and NM),

meeting Ford Specification

WSS-M97B51–A1.

Note:

Use of Motorcraft Cooling System Stop Leak Pellets, VC-6, may

darken the color of Motorcraft Premium Gold Engine Coolant from
yellow to golden tan.

•

Do not add/mix an orange-colored, extended life coolant such
as Motorcraft Specialty Orange Engine Coolant, VC-2 (US) or
CXC-209 (Canada), meeting Ford specification WSS-M97B44–D
with the factory-filled coolant.

Mixing Motorcraft Specialty Orange

Engine Coolant or any orange-colored extended life product with your
factory filled coolant can result in degraded corrosion protection.

•

A large amount of water without engine coolant may be added, in case
of emergency, to reach a vehicle service location. In this instance, the
cooling system must be drained and refilled with a 50/50 mixture of
engine coolant and distilled water as soon as possible. Water alone
(without engine coolant) can cause engine damage from corrosion,
overheating or freezing.

•

Do not use alcohol, methanol, brine or any engine coolants
mixed with alcohol or methanol antifreeze (coolant).

Alcohol

and other liquids can cause engine damage from overheating or
freezing.

•

Do not add extra inhibitors or additives to the coolant.

These

can be harmful and compromise the corrosion protection of the engine
coolant.

To reduce the risk of personal injury, make sure the engine is
cool before unscrewing the coolant pressure relief cap. The

cooling system is under pressure; steam and hot liquid can come out
forcefully when the cap is loosened slightly.

2006 Freestyle (219)
Owners Guide (post-2002-fmt)
USA (fus)

Maintenance and Specifications

254

Summary of Contents for 2006 Freestyle

































































































































































































































































































Reviews:

No comments

Related manuals for 2006 Freestyle

Davis Instruments 8127 Installation Instructions Manual preview
8127
Brand: Davis Instruments Pages: 16
B-Speech B-Speech Prim Manual preview
B-Speech Prim
Brand: B-Speech Pages: 18
B-Speech Pago INBTHF020 User Manual preview
Pago INBTHF020
Brand: B-Speech Pages: 24
Waeco MagicWatch MWE250 Installation And Operating Manual preview
MagicWatch MWE250
Brand: Waeco Pages: 172
METRON PC05T User Manual preview
PC05T
Brand: METRON Pages: 4
Softride 26428 Instructions preview
26428
Brand: Softride Pages: 4
Vangear Woody-Pod Instruction Manual preview
Woody-Pod
Brand: Vangear Pages: 5
Safe Fleet FRC SafeTrack Hardware Installation Manual preview
FRC SafeTrack
Brand: Safe Fleet Pages: 20
Oldsmobile 1998 Aurora Owner'S Manual preview
1998 Aurora
Brand: Oldsmobile Pages: 380
TATA Motors Indigo eCS Owner'S Manual & Service Book preview
Indigo eCS
Brand: TATA Motors Pages: 166
Advanced Diagnostics MVP PRO Manual preview
MVP PRO
Brand: Advanced Diagnostics Pages: 10
Westin 32-2250 Instructions preview
32-2250
Brand: Westin Pages: 3
TIS TISPLUS User Manual preview
TISPLUS
Brand: TIS Pages: 6
Chevrolet 2012 Malibu Owner'S Manual preview
2012 Malibu
Brand: Chevrolet Pages: 376
Rand McNally tnd 760 User Manual preview
tnd 760
Brand: Rand McNally Pages: 60
Jeep 2002 WG Grand Cherokee Service Manual preview
2002 WG Grand Cherokee
Brand: Jeep Pages: 10
Blueant BLUEANT Z9 User Manual preview
BLUEANT Z9
Brand: Blueant Pages: 137
Sony PSP-180 Instruction Manual preview
PSP-180
Brand: Sony Pages: 2

Brands by name

Popular brands

Load more brands