Home
/
Ford
/
2006 Freestyle
/
User Manual

Ford 2006 Freestyle, User Manual, Page: 116 / 288

Share

Page: 116 / 288

Ford 2006 Freestyle User Manual Download Page 116

Stowing the third row bench or split bench seat (if equipped)

1. Stow the head restraints by
pushing the head restraint release
buttons while sliding the head
restraints fully down. Remove all
objects from the seat and stowage
tub.

2. From the rear of the vehicle, fold seatback by pulling and holding the
number 1 strap while pushing the seatback forward. Release strap once
seatback starts rotating forward.

3. Release the cushion latches by pulling the number 2 strap while
pulling on the strap located at the top of the seatback to tumble the seat
all the way into the tub in the floor.

2006 Freestyle (219)
Owners Guide (post-2002-fmt)
USA (fus)

Seating and Safety Restraints

116

«
...
114
115
116
117
118
...
»

Summary of Contents for 2006 Freestyle

































































































































































































































































































Reviews:

No comments