18
3-5. MFR Remote Control Unit Setup
The MFR remote control unit will automatically communicate with an MFR main unit or
MFR-RULINK immediately after connection is established.
The MFR remote control unit is properly configured at factory shipment, but when setting
changes are required, set them from Web-based control.
The main unit side of MFR-18RU can be set using the Web-based control of the main unit.
The MFR-RULINK side of MFR-39RU can be set using Web-based control of the MFR-RULINK.
Refer to
“
6. Settings of the remote control unit
” of “Operation manual of MFR Series Web
based control” for details on remote control unit settings.
Displaying Web based control screen
Open the Web-based Control Screen of the main unit. Click
System
Settings
in the upper left to display a menu tree..
Clicking a remote control unit connected to the LAN of the main unit
opens a setting screen.
Clicking a remote control unit connected to the MFR-RULINK LAN
expands the menu tree such as shown at right, but a setting screen
will not open by clicking the name.