49
9. Information Display
While setting up the FA-10DCCRU, relevant information is displayed on the 8-digit display in two
modes (
Full
and
Simple
). The following Information Display lists show when these information
messages are displayed.
Full
: Displays information or message in detailed format. Note that while setting menu items,
information is displayed in Simple mode and about 2 seconds after entering a setting, it is displayed
in Full mode.
Simple
: Displays information or message in short format.
* To change the display mode, set under
④
Display Mode
(See section 8.
“SYSTEM Settings.”)
9-1. Messages during Main Unit Connection
(**: Setting values)
Displayed message
(Full / Simple)
When information/message is displayed:
Refer to
Please Choose Direct MU No FA-10DCCRU is in Direct Connection mode, but no
main unit is selected.
Connect to a main unit using 1-5, 6-10, 11-15 or 16-20
button.
ID**
When FA-10DCCRU is connected to a main unit in
Unit ID Connection mode, its Unit ID number is
displayed.
Disconnect
FA-10DCCRU is in Unit ID Connection mode, but
no
main unit is connected.
It is also displayed while trying to connect to a main
unit.
ID**: No IP Address Assigned FA-10DCCRU is trying to connect to a main unit in
Unit ID Connection mode, but no IP address has been
set for the specified Unit ID number.
ID**: IP**. **. **. **
(No Name)
When FA-10DCCRU is connected to a main unit in
Unit ID Connection mode and no Unit Name is set for
the main unit, its IP address is displayed.
ID**: FA-1010
When FA-10DCCRU is connected with a main unit, its
Unit Name is displayed.
Direct Mode Connection
While changing the connection mode to
Direct
.
Unit Mode Connection
While changing the connection mode to
Unit ID
.
No Assigned IP Address
FA-10DCCRU is trying to connect to a main unit in
Direct Connection mode by pressing a number button
(1-5, 6-10, 11-15 or 16-20), but no IP address has
been set for the specified MU ID number.
Set an IP address for the MU ID (Unit ID) number.
Connecting(Direct)
FA-10DCCRU is connecting to a main unit in Direct
Connection mode.
If the connection time is too short, the message may
not appear.
Connecting (Unit)
FA-10DCCRU is connecting to a main unit in Unit ID
Connection mode.
If connection time is too short, the message may not
appear.
No Connection Established
(IP **. **. **. **)
When the FA-10DCCRU fails to connect to a main
unit, the message and specified main unit IP address
are displayed.
Verify the network connection and settings.
Note that the FA-10DCCRU will attempt to connect to
the main unit while the message is being displayed.
