13
2-3. Internal Settings
IMPORTANT
Note that internal switch settings should remain unchanged from factory default
settings under most operational circumstances. If you have accidentally changed the
setting, refer to the MAIN card settings below to return to the factory default settings.
Further note that adjustment and maintenance should only be performed by qualified
technical personnel familiar with FOR-A equipment.
WARNING
Do not access internal cards or connect peripheral units with the unit power ON.
Always power OFF all connected units / disconnect power cords prior to accessing the
interior. To protect boards from electrostatic damage, do not touch board components.
2-3-1. Dipswitch Settings
The following dipswitch settings can be made on the MAIN CARD inside the FA-1010.
Dipswitch DS1 Settings
Pin No.
Default
Settings
DS1
1-8
OFF
Do not change
DS2
1
OFF
FA-10PS option not installed: OFF
FA-10PS option installed: ON
2
OFF
FA-10ANA-AUD option not installed: OFF
FA-10ANA-AUD option installed: ON
3-8
OFF
Do not change
