46
4-2-11-1. Take Mode Operation
Take Mode allows you to simultaneously switch multiple channels.
Blue-highlighted crosspoints in the below figure are currently selected sources.
Source selection changes are displayed in yellow as pre-selections in the left figure.
Pressing the
Take
button switches crosspoints set as the pre-selections in yellow, and
switches them blue as in the right figure.
IMPORTANT
Switching source signals of which following settings are set differently may produce a
noise in the video and/or audio signals. To perform shockless swithching, match the
following settings for source signals (FSs) to be switched.
- Sync Mode
(See sec. 4-2-4-1.
- System Phase (See sec. 4-2-4-2.
4-2-11-2. Salvo Mode
Salvo Mode allows you to preset 100 crosspoint matrices for later use.
Presetting Matrices
1) Select Salvo Mode. Select a salvo number to register, and click
Edit
in the Salvo
section. A Salvo Memory Edit screen as shown below on the right opens.
Click Edit.
