67
FS1-10 Audio Assignment
Item
Default
Setting range
Description
Channel
Channel 1
Channel 1
– 16
Allows you to select an audio signal to output
for the selected FS.
Current
-
-
Displays the currently assigned audio
channel.
New
Setting
FS1-10
Ch1-16
FS1 Ch1-16
|
FS10 Ch1-16
AES Op. A Ch.1-8
*1
|
AES OP. D Ch.1-8
*1
Analog Op.Ch1-4
*2
Dowm Mix1 L
Dowm Mix1 R
|
|
Dowm Mix10 L
Dowm Mix10 R
Silence
500Hz Tone
1KHz Tone
Allows you to select an audio signal type and
channel to output to respective audio
channels.
Channels of audio sources selected in the
Select Audio Group section are displayed.
*1
Displayed if the FA-10AES-BL/UBL/UBLC option is installed in the option slot.
*2
Displayed if the FA-10ANA-AUD option is installed.
4-3-8-1. Audio Mapping (FA-10AES Option)
Clicking
Assign
at the bottom of each option column in the Audio Mapping page opens a
corresponding option setting page.
AES option buttons also appear in the
Select Audio Group
section on the left-hand side
in an FS/Option audio setting page. Clicking an AES option shortcut button displays and
allows assignments of AES source channels in the
New Setting
boxes.
