22
<SHV Dual Green Signal (3G-SDI Level-B-DS 8ch 8K Dual Green) Input>
Set all 8 FS channels (FS3 to FS10) as shown below.
Set
Sync Mode
to
Frame
.
Set
Sync Format
to
2x1080/59i (Level-B)
.
(*1)
Set
3G SDI Output Payload ID
in
Video System
to
Pass
.
(*2)
*1 FA-1010 cannot recognize SHV Dual Green signals by Payload ID, because SHV signal formats are not
Dual Link (1080/59p) but Dual Stream (2x1080/59i) of 3G-SDI Level-B. Manually specify the signal format.
*2 FA-1010 cannot add the Payload ID of SHV Dual Green (2x1080/59i). Pass Payload ID in inputs through
to outputs.
Apart from above settings, to enable SHV Dual Green mode, DID and SDID codes in FS3
input signals must be as follows:
DID: 0x52
SDID: 0x01
Even if SHV Dual Green signals are synchronized with the external reference, there may
exists some small differences in clock levels. In such cases, frame skips/repeats do not
occur simultaneously in 8 FS channels during processing and this results in image distortion
and color shifting. FA-1010 can correct the timing difference in 8 inputs, up to
1 line
in
3G-SDI Level-B, to remove image distortion.
4-2-1. FS Input
The Video Input page allows you to assign input video signals to FS 1 to 10.
Item
Default
Setting range
Description
Frame Rate
23.98/29.97/
59.94 fps
23.98/29.97/59.94 fps
24/25/50 fps
Allows you to select a frame
rate for the format selected
under Sync Format.
FS Name
-
-
Displays the names that
have been set in the Main
Unit page.
Matrix
-
SDI1-10
Allows you to select input
video signals to input to FS 1
to 10.
Sync Format
*1
Auto
When Frame rate is set to
23.98/29.97/59.94 fps:
Auto
525/60
1080/59i
1080/23PsF
1080/59p(Level-A)
1080/59p(Level-B)
2x1080/59i(Level-B)
2x1080/29p(Level-B)
720/59p
Allows you to select video
signal input formats for FS 1
to 10.
Auto
: Automatically
identifies the input format
according to the Frame Rate
setting.
Select 2x1080/59i (Level-B)
for slow-motion 2x speed
signals (119.88i) and Super
