FONESTAR MX-867RU, Instruction Manual

Page: 5 / 20

EN
- 5 -
If a priority microphone is being connected, connect it to input 1.
If connecting to a line level source, set the sensitivity adjustment control to approximately halfway.
Adjust this control until an ideal sensitivity is achieved.
- Check that the input volume controls and the headphones output are set at their minimum.
- Power the mixer/amplifier mod.
MX-867RU
using the AC power supply.
- Once the connections have been made according to your needs, connect the devices to the power
supply and switch them on. After use, do not forget to switch off and disconnect the device from the
power supply.
FUSE
ZONE 4
REMOTE
VOL
REMOTE
VOL
BAL. OUTPUT BAL. OUTPUT
REMOTE
VOL
BAL. OUTPUT
REMOTE
VOL
BAL. OUTPUT
ZONE 3 ZONE 2 ZONE 1 FM ANT INPUT 4 INPUT 3 INPUT 2
GAIN
INPUT 1
PHANTOM
+48 V
GAIN
PHANTOM
+48 V
~115 V AC, 50/60 Hz FUSE: T1.6 A 250 V
~230 V AC, 50/60 Hz FUSE: T0.8 A 250 V
MUL
TIZONE MIXER / PREAMPLIFIER
MX
-867RU
MX-867RU
PLAYER
POWER AMPLIFIER
TECHNICAL SPECIFICATIONS
MX-867RU
FEATURES
Mixer/preamplifi er.
Microphone input with paging priority.
Allocation matrix with 5 input channels to 4 output zones.
USB/SD player for MP3 fi les.
Digital FM radio tuner.
4 output zones with independent volume control.
Remote volume control for the zones.
Phantom power supply.
INPUTS
1 balanced microphone, 6.3 mm stereo jack, 12 mV RMS
1 balanced mic., combo (XLR and 6.3 mm jack), 12 mV RMS
2 balanced mics./lines combo (XLR and 6.3 mm jack) adjustable, 12 mV RMS and 640 mV RMS
1 stereo aux, 2 x RCA, 230 mV RMS
1 stereo aux, 3.5 m jack, 450 mV RMS
OUTPUTS 4 balanced zones, XLR, 2.5 V RMS
Remote volume control for the zones
1 stereo monitor, 6.3 mm jack, 1 V RMS
CONTROLS 4 micro allocation switches for zones 1 to 4
Inputs 1 to 4: volume control
Inputs 2 and 3: gain control
Zones 1 to 4: volume control
Monitor: volume control and zone selection
USB/SD player
FM tuner
RESPONSE
20-20,000 Hz
DISTORTION Harmonic: < 0.2 % to 1 kHz
S/N RATIO Microphones > 65 dB
Aux/Line > 80 dB
PHANTOM
48 V in mics. 2 and 3, selectable
PRIORITY Mic. 1 input level priority, selectable
POWER SUPPLY 230/115 V AC, 9 W
DIMENSIONS 483 x 44.5 x 200 mm depth. 1 U 19" rack