PROGRAMMING
PROGRAMMING A SCENE
- Hold down the PROGRAM button for 3 seconds to access the programming mode. The LED PROGRAM
indicator will flash constantly.
- Select the scanners that correspond to the devices you wish to program.
- Adjust the sliding controls for each channel, in accordance with the required setting. Press the PAGE
SELECT button if the device has more than 8 channels, to program the value of channels 9 to 16.
- Before programming another scanner, deactivate the scanner that you have just programmed. Then select
the new scanner and adjust the sliding controls for the new device. You can program as many scanners
as you need consecutively.
- Select the bank where you want to store the scene using the BANK UP and BANK DOWN buttons. There
are 30 different banks available. Each bank can store 8 scenes.
- Press and hold the MIDI/ADD button and press the SCENES 1-8 button at the same time to store the scene
in its definitive location. All the indicators will flash 3 times to show that it has been programmed correctly.
- Repeat the previous steps to store as many scenes as you wish.
- Press and hold the PROGRAM button for 3 seconds to exit the programming mode and press the
BLACKOUT button to activate the output channels again.
EDITING A SCENE
- Hold down the PROGRAM button for 3 seconds to access the programming mode. The LED PROGRAM
indicator will flash constantly.
- Select the bank where the scene is stored using the BANK UP and BANK DOWN buttons.
- Press the chosen SCENES 1-8 button to display the scene and be able to edit it.
- Select the scanners that correspond to the devices you wish to program.
- Adjust the sliding controls for each channel, in accordance with the required configuration. Press the PAGE
SELECT button if the device has more than 8 channels, in order to program the values for channels 9 to
16.
- Press and hold the MIDI/ADD button and press the SCENES 1-8 button at the same time to store the scene
in its definitive location. All the LED indicators will flash 3 times to show that it has been programmed
correctly.
- Repeat the previous steps to modify as many scenes as you wish.
- Press and hold the PROGRAM button for 3 seconds to exit the programming mode and press the
BLACKOUT button to activate the output channels again.
DELETING A SCENE
- Hold down the PROGRAM button for 3 seconds to access the program mode. The LED PROGRAM
indicator will flash constantly.
- Select the bank where you wish to store the scene using the BANK UP and BANK DOWN buttons.
- Press and hold the AUTO/DEL button and press the SCENES 1-8 button for the scene that you wish to
delete at the same time. All the LED indicators will flash 3 times to show that the scene has been deleted
correctly.
- Repeat the previous steps to delete all the scenes that you wish.
- Hold down the PROGRAM button for 3 seconds to exit the programming mode and press the BLACKOUT
button to activate the output channels again.
- 8 -
EN
