4.-
A.-
BANK UP, BANK DOWN
: allows selection from among the 30 banks available, in order to select
and program scenes.
B.-
PROGRAM
: allows activation of the the scene programming mode. The PROGRAM indicator will
flash on the display.
C.-
MIDI/ADD
: allows functions selected in programming mode to be added.
Note:
control function via an external MIDI device not available.
D.-
AUTO/DEL
: allows activation of automatic mode. The AUTO TRIGGER indicator will light up on
the display. Allows functions selected in programming mode to be deleted.
E.-
MUSIC/BANK COPY:
allows the sound activation mode to be activated. The MUSIC TRIGGER
indicator will light up on the display. Allows the 8 scenes from a bank to be copied during
programming mode.
F.-
TAPSYNC/DISPLAY
: allows the SPEED to be fixed using pulses in line with the required rhythm.
In programming mode, it is possible to alternate between different displays on the screen.
G.-
CHASE 1-6:
allows selection of each of the programmable chase memories.
H.-
BLACKOUT
: provokes an effect of total darkness for the output channels. Place all the channels
in value 0 while this control is activated. The BLACKOUT indicator will flash on the display.
5.-
SLIDING CONTROLS
: allow the output value for each of the channels to be adjusted between 0 and 255.
Depending on the PAGE SELECT control, channels 1 to 8 or 9 to 16 can be controlled.
6.-
PAGE SELECT
: allows selection among channels 1 to 8 (PAGE A) or from 9 to 16 (PAGE B). The indicator
for each group will light up green when active.
7.-
SPEED
: sliding control for modifying the time each scene lasts within a chase in automatic mode. The
minimum value is 0.1 seconds and the maximum is 10 minutes.
8.-
FADE TIME
: sliding control for fixing the transmission interval between scenes within a chase in
automatic mode. If the FADE TIME control is in position 0, the change between scenes will be instant.
The minimum value is 0 seconds and the maximum is 30 seconds.
- 5 -
EN
