AUTOMATIC MODE
In this mode you can choose between scene, bank or chase reproduction. To do this you should have
previously programmed a scene or a chase. If you have not, then go to the PROGRAMMING section to store
a scene.
REPRODUCING A SCENE
- Select the bank where the scene is stored using the BANK UP and BANK DOWN buttons.
- Press the SCENES 1 to 8 button to activate reproduction of the chosen scene.
- If you wish, modify the sliding controls for each channel. Press the PAGE SELECT button if the device has
more than 8 channels, to be able to set the value of channels 9 to 16.
REPRODUCING A BANK
- Select the bank where the scene is stored using the BANK UP and BANK DOWN buttons.
- Select the time each scene lasts using the SPEED sliding control and the transition time between scenes
using the FADE TIME sliding control.
- Press the AUTO/DEL button to activate bank reproduction.
- While a bank is being reproduced, you can activate another one, and select it using the BANK UP and
BANK DOWN buttons.
Note
: if you modify the sliding controls during reproduction, the channel values will be affected but will not
be stored.
REPRODUCING A CHASE
- Select the chase that you wish to reproduce using the CHASE 1-6 buttons. The chases will be reproduced
following the sequence 1-2-3-4-5-6, and only if they have been programmed and activated.
- Select the time each scene lasts using the SPEED sliding control and the transition time between scenes
using the FADE TIME sliding control.
- Press the AUTO/DEL button to activate chase reproduction.
Note
: if you want to modify the number of active chases during reproduction, press buttons CHASE 1-6.
If you modify the sliding controls during playback, the channel values will be affected but will not be stored.
SOUND ACTIVATION MODE
- Check that the automatic mode or the programming mode have not been activated, by viewing the display.
If this is the case, press the AUTO/DEL button to deactivate the automatic mode or hold the PROGRAM
button down for 3 seconds to exit the programming mode.
- Press the MUSIC/BANK COPY button to start the sound activation mode using the incorporated
microphone.
- A bank or a chase sequence can be reproduced in this mode. Select the bank to be reproduced using the
BANK UP and BANK DOWN buttons or choose the chase to be reproduced using the CHASE 1-6 buttons.
Note
: the microphone incorporated requires a high level of sound to start operating.
- 7 -
EN
