background image

66

Voice/Videophone Calls

Talking without using hands in a car

In-car Handsfree

You can make and receive voice calls from a handsfree compatible device by connecting the FOMA 

terminal via USB to such device as the In-Car Hands-Free Kit 01 (optional) or car navigation system.

For operations of handsfree devices, refer to the instruction manual for each handsfree device. Note that the 

FOMA In-Car Hands-Free Cable 01 (optional) is required to use the In-Car Hands-Free Kit 01 (optional).

INFORMATION

If the setting is made to play sounds from a handsfree device, the ring alert sounds from a handsfree device regardless 

of the Silent Mode setting or the ring alert settings on the FOMA terminal.

When a videophone call is made or received with a handsfree device, a substitute image is sent to the other party.

The operation during incoming calls when Answer Machine is set follows the Answer Machine settings.

If the setting is made to play sounds from a handsfree device, the call continues even if the FOMA terminal is closed, 

regardless of Close Setting.

Receiving voice/videophone calls

1

A call arrives

The ring alert sounds, the display light turns on and the Enter key lights or flashes.

2

n

The call duration is displayed.

You can also answer a voice call by pressing 

0

 - 

9

or 

#

 other than 

n

 (Any Key 

Answer). 

P69

While a videophone call is being connected, your image is displayed on the screen.

You can also answer a videophone call by pressing 

t

.

The other party’s voice comes out of the speaker during a videophone call (Speakerphone function).

For a videophone call, the substitute image may be displayed depending on the other party’s settings.

Receiving a videophone call with the substitute image: 

a

The substitute image is sent to the other party when the videophone call is connected.

Even when Chara-den is set as the substitute image, Chara-den may not be displayed. If this happens, 

the default image for the substitute image setting is sent to the other party.

3

f

 to end the call

Voice call

Videophone call

Talking screen

Talking screen

Connecting screen

Summary of Contents for D905i


































































































Reviews: