45
Before Using the Handset
INFORMATION
●
When you turn on the FOMA terminal after replacing the UIM (except when Omakase Lock (Remote Lock) is set), entry of the
4 to 8-digit terminal security code is required. After entering the correct terminal security code, the standby display appears.
If a wrong terminal security code is entered 5 times consecutively, the power is turned off ( but can be turned on again).
●
When you turn on the FOMA terminal, the PIN1/PIN2 code entry screen appears depending on the setting (
☛
P155,
P402). Enter the PIN1 code or PIN2 code.
●
When
Normal use
of
Display light time
in Display Light Setting is set to other than
Always
, if you do not press any keys for
about 90 seconds, the screen display disappears.
☛
P140
Making initial settings
Initial Setting
When you turn the power on for the first time, set the date and time, terminal security code, keypad
sound and other settings.
･
By default the following items are set:
1
Turn the power on
☛
P44
2
Set each item
z
p
･
If you press
f
to end the operation without setting
Password
or
Request permit/deny
, a confirmation
screen appears asking whether to quit. If you select
Yes
and quit, the initial setting screen appears the
next time you turn on the power.
･
You can quit in the middle and change the settings afterward.
Setting item
Default
Setting item
Default
Date & time
Adjust time/time diff: ON
Motion control
setting
i-motion: Landscape play
Full Browser: ON
Document Viewer: ON
Interior design clock: ON
Machi-chara: ON
Display new mail: OFF
Music skip: OFF
Smiley/Pict/Symbol: OFF
Password
0000
PushTalk caller ID
Hide caller ID
Request permit/deny
Always deny*
1
Keypad sound
Keypad sound1
Speed selector sound Selector sound1
Slide
sound
Open slide Melody
/
スライド・オープン音
1
(Slide opening sound 1)
*1
Always permit
is highlighted on the screen,
regardless of the actual setting.
Close slide Melody
/
スライド･クローズ音
1
(Slide closing sound 1)
Date & time
：
Enable or disable the automatic time correction and set the date and time.
☛
P46
Password
：
Set the terminal security code used for various terminal operations.
☛
P155
PushTalk caller ID
：
Set whether to notify the caller ID when you make a PushTalk call and add a
member during PushTalk.
☛
P96
Request permit/deny
：
Set whether to permit Location Request and provide the location information. You
can set to either permit or deny Location Request. To set the permission period, use
Request Permit/Deny.
☛
P300
Keypad sound
：
Set the sound generated when pressing the keypad.
☛
P126
Speed selector sound
：
Set the sound generated when rotating the Speed Selector.
☛
P126
Slide sound
：
Set the sound generated when opening/closing the FOMA terminal.
☛
P127
Motion control setting
：
Set the functions for Motion Control.
☛
P383
Next
▲
