Foma D905i Manual Download Page 97

Page: 97 / 97

357-4

NOTE: This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that interference will

not occur in a particular installation. If this equipment

does cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the

following measures:

･

Reorient or relocate the receiving antenna.

･

Increase the separation between the equipment

and receiver.

･

Connect the equipment into an outlet on a circuit

different from that to which the receiver is

connected.

･

Consult the dealer or an experienced radio/TV

technician for help.

NOTICE:

This device complies with Part 15 of the FCC Rules

and with RSS-210 of Industry Canada. Operation is

subject to the following two conditions:

(1) this device may not cause harmful interference,

and

(2) this device must accept any interference

received, including interference that may cause

undesired operation.

NOTICE:

Changes or modifications made to this equipment not

expressly approved by Mitsubishi Electric

Corporation may void the FCC authorization to

operate this equipment.

NOTICE:

This Class B digital apparatus complies with

Canadian ICES-003.

Cet appareil numérique de la classe B est conforme

à la norme NMB-003 du Canada.

Summary of Contents for D905i


































































































Search results

Summary of Contents for D905i

Reviews:

Related manuals for D905i

Brands by name

Popular brands

Foma D905i, Manual

Search results

Summary of Contents for D905i

Reviews:

Related manuals for D905i

Brands by name

Popular brands