FOM INDUSTRIE BLITZ, Use And Maintenance Manual

Page: 82 / 152

76
G B G B G B G B G B
BLITZ
10.9 FITTING A NEW VERTICAL VICE CYLINDER
Supplementary vertical vice ( Fig. 10-16 )
1 ) Turn the master switch to “0” and secure it with a padlock, then turn the main switch (400 V - three-phase)
to “0” .
2) Remove the PVC pad.
3) Undo screw “A” and take out cylinder “B” .
4) Disconnect tube “C”
5) Replace the cylinder in its housing and tighten screw “A” .
6) Refit the PVC pad (or fit a new one if necessary).
7) Connect up tube “C” .
8) Release the pneumatic master switch and turn it to “I” then turn the main switch to “I” .
9) Carry out a few test runs.
10-16
C
A
B