FOM INDUSTRIE BLITZ, Use And Maintenance Manual

Page: 67 / 152

61
BLITZ
G B G B
G B G B
G B
09-27
E
1
ST
LEFT SUPPORT PLATE
2 ND LEFT SUPPORT PLATE
1
ST
LEFT SUPPORT SOLENOID VALVE
I
II
III
After opening the fixed head rear guard, fit the relative solenoid valve in place of the closing plate (see Fig. 09-
27 ) following the directions given in Chap. 10.5 CHANGING SOLENOID VALVES and in the electrical wiring
and pneumatic diagrams ( N.B . the 1 st Left support solenoid valve is the one for the lower closing plate, the 2 nd
Left support is the one for the upper closing plate).
Connect one of the air hoses
“E” - Fig. 09-27 already made available (to make sure the hose to be connected
is the right one, first blow air into the hose with the gun and check that it comes out of hose “B” - Fig. 09-25 ).