FOM INDUSTRIE BLITZ, Use And Maintenance Manual

Page: 81 / 152

75
BLITZ
G B G B
G B G B
G B
10-15
10.8 FITTING A NEW HORIZONTAL VICE CYLINDER
1 ) Turn the pneumatic master switch to “0” and padlock it, then turn the main switch to “0”.
2 ) Remove the vice pad.
3 ) Undo the release handle “A” - Fig. 10-14 and remove the cylinder.
4 ) Disconnect the air tubes “B” - Fig. 10-14 .
5 ) Fit the pad to the new cylinder, replacing it with a new one if necessary.
6 ) Position the new cylinder inside its housing, securing it with the release handle “A” .
7 ) Connect the air tubes “B” to the union on the new cylinder.
8 ) Release the pneumatic master switch and turn it to “I” then turn the main switch to “I” .
9 ) Carry out a few test runs.
10-14
B A