Operating manual BMGZ 600A
17
6.3
Mounting the Electronic Unit
The evaluation electronic unit is available in variants as follows:
BMGZ6xxA.W
:
Housing for wall mounting (aluminium; IP54) (fig. 6)
BMGZ6xxA.S
:
Housing for panel mounting (aluminium; Front IP54,
Back IP00)
BMGZ6xxA.K
:
mounted in steel cabinet 400x400x275 (IP55)
Protection class IP55 is achieved only by closed cover otherwise IP54. For
outdoor mounting, the robust steel cabinet version (BMGZ6xxA.K) is
recommended.
6.4
Mounting the BMGZxxA.S
fig. 13b: mounting BMGZ610A, BMGZ611A, BMGZ620A
B600029d
Mounting of the housing for panel:
1.
Unscrew all 4 side screws (“Eckschrauben” see fig. 13b)
2.
Remove all cables which are connected with the electronic board of the front
panel (cables connectors).
3.
Unscrew the earth cable of the electronic board.
4.
Take away the front panel from the box.
5.
Put the front panel into the opening in the cabinet from the front side.
6.
Mount back and front side of the box on the back side of the cabinet
7.
Put in place and screw the 4 fixations screw.
