Operating manual BMGZ 600A
13
fig. 7: The measuring roller has to be placed as far away from the material feed as
the bulk material may settle before passing the measuring roller.
B600001e
fig. 8: To minimize influences of the belt tension, the measuring roller should be
located as far away as possible from the drive roller.
B600002e
fig. 9: The measuring roller has to be placed as far away from the turn as the belt
will be supported in the whole weighing range (measuring roller ±2...3m) under all
conditions.
B600003e
Note
When designing the belt scale, the size of the force measuring bearings was
determined based on the maximum flow rate, belt speed and distance between the
support rollers (dimension „a“). Therefore, the measuring roller has to be mounted
equidistant to the neighbouring rollers (±25mm). Axis of measuring roller and
neighbouring rollers must be parallel.
