Operating Manual Web Guide Controller BKS309
23.07.2019
4
3
Product information
3.1
Functional Description
The sensors measure the position of the web edge and send this information as an
analogue signal to the electronic control unit. In our case a BKS309 web guide
controller.
The control compares the position feedback signal with the reference. If the difference
of these two values is higher than the stored dead band value, the steering frame will be
adjusted.
Figure 1: typical arrangement
BKS309_BA_manual.ai
Description
Position Description
1
Steering frame, steering roller, actuator
2 Web,
entry
side
3 Material
sensor(s)
5 Web
guide
controller
Table 1: designation web guide controller
3.2
Web guide controller
The micro-processor based electronic control unit handles all calculations and
communications. Three buttons and a five-key panel serves as the man-machine
interface. Parameter setting can be performed via the operating panel or via a web
browser. All parameters are stored in a none-volatile memory.
