Operating Manual Web Guide Controller BKS309
23.07.2019
32
Offset Centre [Offset><]
Purpose:
This parameter adjusts the position of a steering frame exactly to the
centre.
Position Detection [PosDetec]
Purpose:
This parameter determines what devices that are used to detect the limit
positions.
The user can choose between three types.
Type:
[Potentio]
Purpose:
A potentiometer is used to detect the Home position, Middle Position
and Maximum Position. It is automatically set, if an actuator /
winderGLIDE of the type BKS.D.3 or BKS.D.4 is used.
Type:
[One Hall]
Purpose:
One hall sensor is used to detect the Home position, Middle Position
and Maximum Position.
Type:
[Two Hall]
Purpose:
Two hall sensors are used to detect the Home position, Middle
Position and Maximum Position.
Centre Position [CentrPos]
Purpose: The
[CentrPos] parameter is only used with the position detection
system based on hall sensors. For all other position detection system
this parameter is not used and hence not displayed. The parameter
determines the center position of the actuator spindle in motor steps
(measured from the left reference position). The actuator stops at this
position, if you press the center key
. In Automatic Operation
this parameter has no meaning.
Right Limit [RightLim]
Purpose: The
[RightLim] parameter is only used with the position detection
system based on hall sensors. For all other position detection system
this parameter is not used and hence not displayed. The parameter
limits the maximum travel to the right side of the actuator spindle in
motor steps (measured from the left reference position). In the
operation or in manual mode this limit will never be exceeded
Drive Direction [DriveDir]
