Operating Manual Web Guide Controller BKS309
23.07.2019
8
5
Installation and wiring
5.1
Installation of a steering frame of the FMS-webMASTER series
The mounting orientation of the steering frame (indicated by an arrow), must
correspond with the direction of the moving web. The lower frame is mounted with four
M8 screws to the machine frame. The machine must be prepared to accept the M8
mounting screws.
The steering frame must be grounded. Connect the ground wire to the machine ground.
5.1.1
Installation of the material sensor
The material sensors will be mounted with brackets to the rail of the steering frame or to
the sensor arrangement of the unwind/rewind stand (see installation instruction of the
material sensors).
The installation side "left" and "right" of the material sensor is defined by the direction of
the moving web.
Figure 3: direction of the moving web
BKS309_BA_manual.ai
