Operating Manual Web Guide Controller BKS309
23.07.2019
24
Setting:
[Disabled]
Purpose: If
[Disabled] is chosen then the relay function is disabled. The relay
will never go on.
Digital Input 1, 2, 3 or 4 Modes [Input 1…4]
These are actually fore parameters one for each digital input
Purpose:
This parameter determines the functions of the digital inputs.
The user can choose between seven settings.
Setting:
Edge Triggered Automatic Mode [Edge
→
Aut]
Purpose:
The controller switches either to automatic or manual operation
depending in which mode the controller currently is. The switching is
taking place when a rising edge is detected on the digital input. (Default
setting for dig. input 1)
Setting:
Level Controlled Automatic Mode [Lv
→
Auto]
Purpose:
The controller switches either to automatic or manual operation
depending on the voltage level at the digital input. If the voltage is high
then the controller switches to Automatic otherwise to Manual
Operation.
Setting:
Drive to Center Position [Centre]
Purpose:
If [Centre] is chosen then the motor drive moves to the centre position.
The event is edge triggered. (Default setting for dig. input 2)
Setting:
Decrease Reference Value or Move to the Left [-Ref/
←
]
Purpose:
The controller behaves in two different ways depending on the current
operation mode. If the controller is in manual operation then the motor
drive moves to the left respectively to the retracted position. If it is in
automatic mode then the reference value is decreased. Default setting
for dig. input 3)
Setting:
Increase Reference Value or Move to the Right [+Ref/
→
]
Purpose:
The controller behaves in two different ways depending on the current
operation mode. If the controller is in manual operation then the motor
drive moves to the right respectively to the extended position. If it is in
automatic operation then the reference value is increased.
(Default setting for dig. input 4)
Setting:
Lock Guide [Lock]
Purpose:
The motor drive is immediately locked when this parameter is chosen
and the digital input voltage is high.
