Operating Manual Web Guide Controller BKS309
23.07.2019
18
-
If key is held, steering frame is moving continuously.
-
These functions can also be carried out via the digital inputs
7.3
Approaching and saving dedicated positions
There are two possibilities to alter the values of the Home Position, Middle Position and
Maximum Positions of the actuator. Either you modify the parameters [Home Pos], [Mid
Pos] and [Max Pos] in the menu of the operating parameters or you drive manually to
the desired position and save it.
-
Enable the change of the travel limits by pressing the two keys
at the
same time. The LED above the
key will be on.
-
Travel with the actuator to the desired position with the keys
-
The display will show the actual position with an accuracy of 0.1mm
-
Press the
key. The LED above the key starts flashing and expects the definition
of the setting.
-
The definition is done with
o
for the Home Position
o
for the Maximal Position and
o
for the Middle Position
-
On the displayed following comments will report completion.
o
Display first line
[Save Pos]
o
Display second line
[Done] or [Invalid]
-
-
In the case of [Invalid] the display flashes.
-
Possible cause: the position couldn’t be found e.g. because the “home” or
“maximum” position was set over the middle position.
