66
e) Rudder Function (Mode 1 and 2)
If the control stick for the rudder function is moved to the left, the rudder must deflect to the left. The rear rudder
edge must be deflected to the left by approx. 8 – 10 mm. In flight, the landing gear is pressed to the right and the
model flies to the left. The tail spur is deflected to the left at the same time. You can also change the direction on the
ground like this.
Figure 18
If the control stick for the rudder function is moved to the right, the rudder must deflect to the right. The rear rudder
edge must be deflected to the right by approx. 8 - 10 mm. In flight, the landing gear is pressed to the left and the
model flies to the right. The tail spur is deflected to the right at the same time. You can also change the direction on
the ground like this.
Figure 19
When switching to mode 1, the function of the rudder would stay on the left control lever.
