www.fmiproducts.com
112127-01C
25
instaLLation
Continued
Figure 41 - Installing Log No. 3
3
Figure 42 - Installing Log No. 4
Figure 43 - Placing Ember Material on
Burner
4
Ember
Material
7. Pull ember material apart into pieces no
larger than a dime. Place these pieces
loosely and sparingly directly onto the
exposed section of front burner and along
space between burner and grate prongs
(see Figure 43). This will create the
glowing ember appearance as the flame
touches the ember material. Do not block
air slots by using too much ember material
in one area. It is not necessary to use all
of the ember material provided.
8. Replace glass door and stove front.
See
Removing/Replacing Glass Door
,
page 23.
WARNING: The glass door
must be securely in place before
running this burner system. Do
not run this burner system if
glass is missing or broken.
