www.fmiproducts.com
126116-01D
19
INSTALLATION
Continued
INSTALLING LOGS, LAVA ROCK
AND GLOWING EMBERS
It is very important to install these logs exactly
as instructed. Do not modify logs. Only use
logs supplied with fireplace.
Remove screen door assembly, unlock door
latches, and open glass door. See
Removing
Glass Door
, steps 1 to 3, page 18. Install logs
according to instructions for fireplace model
numbers.
1. Find and place log #1 (rear log) on top of
grate. Make sure notches in bottom of log
fit over grate (see Figure 27).
Figure 27 - Installing Log No. 1
Figure 28 - Installing Log No. 2
3. Place log #3 (crossover log) onto rear and
front logs. Make sure it is seated properly
on surface of rear log and pin on front log
as shown in Figure 29.
2. Rest log #2 (front log) on pins on front part
of grate (see Figure 28).
1
2
Metal
Pins
Log
Notches
Grate
Assembly
Figure 29 - Installing Log No. 3
Figure 30 - Installing Log No. 4
3
4
Metal
Pin
Rear Log
Front Log
Crossover
Log
Log
Landing
Front
Log
4. Place log #4 (right log) onto log landing on
right side of front log as shown in Figure 30.
